Workshop - PICCO - Filter for aquariums less than 50 liters

PICCO
The designer external filter for aquariums of less than 50 liters.

The PICCO has a silent and powerful external pump (300 l/h), with an adjustable flow rate from 25 to 100%.
The filter body as well as the connections are made of 304 stainless steel.

In this kit, you will have glass suction and rejection rods and the pipes provided are transparent.

Filtration foams, Porous ceramics,
suction cups and elbows are also included so you can
use your PICCO as soon as you receive it.

The PICCO is made in France!

PICCO Pack contains:
-PICCO Filter (body and pump)
-Nano Bacteria Ring (ceramic) 100Gr in mesh
-15 PPI filter foam
-Filter cotton sponge
-Glass suction and rejection rod (10mm)
-Pipes (9/12) 2x50cm
-Suction cup x2
-Elbow x4
-5V/1A USB adapter

Specifications:
Dimensions: 110(D)x135mm(H)
Flow rate 5L/min - 300 L/h
Maximum lift height 1m
Capacity 85cl


Usage tips:

During the installation of your PICCO, it is necessary to fill it with water before closing it and plugging it in.
Priming is done in 4 steps:
1: Place the suction rod in the aquarium water.
2: Place the rejection rod in a bucket lower than the level of the aquarium and perform a small suction in it
3: Let the water and air bubbles escape into the bucket.
4: Place the rejection rod in the aquarium and plug in the filter.

The pump is powerful, so we advise you to use level 1 or 2.
These two levels are more than sufficient for aquariums of less than 50 liters.
In addition, the pump is quieter and vibrates less when used this way.